Commanding Subpoints

You want to command the current value of a subpoint that appears across multiple devices and applications.

System Manager is in Engineering mode and you have selected the FLN Device Commander tab.

In System Browser, select Management View.

Select Project > Field Networks and then navigate to a network, panel, or device, or drag-and-drop multiple devices into the Selected TECs pane.

The FLN devices and their children from the network, panel, or device display in the Selected TECs pane in the FLN Device Commander tab.

From the Application drop-down menu, select the application number whose subpoint you want to release.

In the Applicable TEC pane, the devices associated with the application display.

From the Subpoint drop-down menu, select the subpoint you want to release.

In the Value field, type the desired current value, and then go to Step 7.

If it is a BACnet subpoint, you can do one or more of the following:

Select the Set Value radial button to change the current value of the BACnet subpoint,

Select the Set Initial Value, to change the initial value of the BACnet subpoint,

Change the subpoint Priority, by selecting a priority from the drop-down menu.

Click the Execute button.

The Command Summary dialog box displays.

(Optional) Click View Log to view and save the devices and subpoint status.

Click Close.

The Command Results displays a log of point commands that were issued since the last time the log was cleared.