Set the Initial Value for a BACnet Subpoint

  • You want to set the initial value of a subpoint that appears across multiple devices and applications.
  • You want to command the initial value for one or more BACnet subpoints.
  • System Manager is in Engineering mode and you have selected the FLN Device Commander tab.
  1. In System Browser, select Management View.
  1. Select Project > Field Networks and then navigate to a network, panel, or device, or drag-and-drop multiple devices into the Selected TECs pane.
  • The FLN devices and their children from the network, panel, or device display in the Selected TECs pane in the FLN Device Commander tab.
  1. From the Application dropdown menu, select the application number whose subpoints initial value you want to set.
  • In the Applicable TEC pane, the devices associated with the application display.
  1. From the Subpoint dropdown menu, select the subpoint whose initial value you want to change.
  1. Select the Set Initial Value radial button, to change the initial value of the BACnet subpoint.
  1. In the Value field, type the desired initial value.
  1. Click the Execute button.
  • The Command Summary dialog box displays.
  1. (Optional) Click View Log to view and save the devices and subpoint status.
  1. Click Close.
  • The Command Results displays a log of point commands that were issued since the last time the log was cleared.